The CC series ultra-high vacuum plug-in valve is driven by a screw through the handwheel, and the connecting rod mechanism is pushed (pull) by the transmission rod to drive the valve plate to move in the axial direction, so as to realize the opening or closing of the valve, so as to achieve ultra-high vacuum The purpose of turning on or off the flow of air in the system. It is reasonable in structural design, beautiful in appearance, stable in action, small in size, large in flow rate, reliable in use, good in sealing performance and long in life, and can be widely used in ultra-high vacuum equipment. The applicable working medium is clean air and non-corrosive gas.

The CCQ series pneumatic ultra-high vacuum plug-in valve uses compressed air as the power, changes the direction of the gas path through the electromagnetic reversing valve, pushes the cylinder piston, and pushes (pulls) the connecting rod mechanism through the transmission rod to drive the valve plate along the axial direction. Movement to realize the opening or closing of the valve plate, so as to achieve the purpose of connecting or cutting off the air flow in the ultra-vacuum system. It is reasonable in structure design, beautiful in appearance, stable in action, small in size, large in flow channel, reliable in use, good in sealing performance and long in life, and can be widely used in ultra-high vacuum equipment. The applicable working medium is clean air and non-corrosive gas.

The CCD series electric ultra-high vacuum plug-in valve is driven by the electric screw, the sealing shaft (rod) moves axially, pushes (pulls) the lifting mechanism, and drives the driving body to move in the axial direction. When the positioning plate moves to the stop When block, the sealing pressure plate and the support plate stop moving axially, and the steel ball lying in the ball socket of the sealing pressure plate and the support plate is pushed out of the ball socket by the driving body, so that the support plate and the sealing pressure plate deviate from the driving body and press toward the valve] The supporting surface and sealing surface of the flange, when the steel ball completely leaves the ball socket and is on the plane of the supporting plate and the sealing plate, the pressing force reaches the maximum, and the valve is completely closed. When the driving body is pulled to move backward, due to The friction force between the sealing pressure plate and the support plate and the flange surface is very large, the steel ball is pulled back to the ball socket by the driving body, and the sealing pressure plate and the support plate are pressed to the driving body under the action of the central spring, and follow the driving body - - to the same direction movement, away from the flange orifice, to fully open the valve. The applicable working medium is clean air and non-corrosive gas.

GDC-J(b)/KF Backpack Electromagnetic High Vacuum Flapper Valve is a device that is activated and closed by an electromagnetic drive valve to connect or cut off the vacuum pipeline. It is usually used as a vacuum shut-off valve or an inflation valve in the vacuum pipeline. effect. The applicable working medium is air and non-corrosive gas.